Skip to content

blastIT Manual – Requirements

Installation Requirements #

#

Space Requirements #

  • Dimensions: 162”Wx 108”H x 24” D

Electrical Supply #

  • (3) 3Ph 1/2 HP Electric Motors

Water Supply #

  • Top: 9 GPM Per Manifold
  • Sides: 18 GPM Per Manifold

Product Lines #

  • Liquid Connection: 3/4” FNPT

Tools & Materials #

  • Hammer drill
  • 5-lb hammer
  • 3/4” wrench or socket
  • 7/16” wrench
  • 9/16” wrench
  • Pair of adjustable wrenches
  • Phillips head screwdriver
  • Wire strippers
  • Channel locks
  • Antiseize lubricant
  • Thread tape
  • 1/2” x 4” stainless steel anchors (recommended)

Installation Preparation #

  • Unload the equipment and ensure nothing has been not damaged during transportation prior to beginning installation.
  • Refuse delivery if the equipment is damaged

Placement – Bare Arch (Standard) #

  • The center of the 12’ cross bar should be on the vehicle centerline of your car wash tunnel (generally on the right hand side of the conveyor pit).
  • Legs can be adjusted side to side to meet your specific tunnel requirements before anchoring to the floor
  • Recommended Position – Driver Side
    • The center of the blastIT’s driver side leg should be 40.5” from the conveyor’s “right” side guide rail (inner rail).
  • Recommended Position – Passenger Side
    • The center of the passenger side leg should be 96.5” from the conveyor’s “right” side guard rail (inner rail).

 

blastIT Arch Placement

blastIT Identification #

blastIT Identification

Subscribe To Our E-mail List

Join our mailing list and stay informed about our products and newest innovations.

Request More Info