Installation Requirements #
#
Space Requirements #
- Dimensions: 162โWx 108โH x 24โ D
Electrical Supply #
- (3) 3Ph 1/2 HP Electric Motors
Water Supply #
- Top: 9 GPM Per Manifold
- Sides: 18 GPM Per Manifold
Product Lines #
- Liquid Connection: 3/4โ FNPT
Tools & Materials #
- Hammer drill
- 5-lb hammer
- 3/4โ wrench or socket
- 7/16โ wrench
- 9/16โ wrench
- Pair of adjustable wrenches
- Phillips head screwdriver
- Wire strippers
- Channel locks
- Antiseize lubricant
- Thread tape
- 1/2โ x 4โ stainless steel anchors (recommended)
Installation Preparation #
- Unload the equipment and ensure nothing has been not damaged during transportation prior to beginning installation.
- Refuse delivery if the equipment is damaged
Placement – Bare Arch (Standard) #
- The center of the 12โ cross bar should be on the vehicle centerline of your car wash tunnel (generally on the right hand side of the conveyor pit).
- Legs can be adjusted side to side to meet your specific tunnel requirements before anchoring to the floor
- Recommended Position – Driver Side
- The center of the blastITโs driver side leg should be 40.5โ from the conveyorโs โrightโ side guide rail (inner rail).
- Recommended Position – Passenger Side
- The center of the passenger side leg should be 96.5โ from the conveyorโs โrightโ side guard rail (inner rail).
blastIT Identification #
