1. Introduction #
The manufacturer innovateIT Car Wash Equipment LLC is committed to the continuous improvement of its equipment construction quality and the safe operation of its equipment.
1.1 Warranty #
This manual covers the installation, intended use, and maintenance of the dispenseIT Chemical Delivery System. Misuse or improper operation of this device will void the manufacturer’s warranty.
innovateIT Car Wash Equipment LLC warrants the supplied equipment for a period of one (1) year from the date of shipment and shall be liable for any defects due to defective materials or workmanship of its own manufactured equipment. innovateIT Car Wash Equipment LLC reserves the right, at its sole discretion, to either repair or replace any defective equipment, provided the Buyer informs ICWE in writing immediately upon discovery of such defects.
Warranty claims may be subject to evaluation by innovateIT Car Wash Equipment LLC. The Buyer must obtain a Return Material Authorization (RMA) prior to returning any product. Returned items must be shipped freight prepaid and properly packaged to prevent damage. If the claim is deemed to fall within the scope of warranty, innovateIT Car Wash Equipment LLC will, at its discretion, repair, replace, or issue a credit for the item. Products determined to be outside the scope of warranty will be returned to the Buyer at their expense or disposed of upon written instructions. If the Buyer requires a replacement during the evaluation period, such replacement will be provided at the Buyer’s expense unless the claim is approved and credit is issued following the evaluation.
All items covered under warranty will be shipped exclusively via standard ground shipping methods at no additional cost to the Buyer. Should the Buyer request an alternative shipping method, such as expedited or international shipping, the Buyer will be solely responsible for any cost difference between ground shipping and the requested method.
innovateIT Car Wash Equipment LLC shall not be liable for damages caused by improper or unsuitable use of the supplied equipment, particularly due to incorrect or negligent handling, improper maintenance, incorrect installation or commissioning of the equipment, or improper or incorrect utility supplies (electrical, water, or air).
When purchasing through a distributor, please ask about their warranty coverage on the unit.
1.2 Safety Information #
The instructions in this manual provide you with the information necessary to install and operate the dispenseIT. Before starting installation, the instruction manual should be carefully read and understood. This relates to all dispenseIT documents from innovateIT Car Wash Equipment.
The basic pre-requisite for safe working is compliance with all the safety and handling instructions stated in this manual.
Furthermore, follow all local accident, hazard prevention regulations or general safety regulations when installing and operating the dispenseIT.
The equipment’s operation, maintenance, and troubleshooting must only be carried out by trained personnel. Personnel should be able to interpret a wiring diagram, use a multimeter to read AC and DC power, and apply Lock Out Tag Out (LOTO) safety procedures specific to the equipment.
Electrical installation must adhere to local codes and the National Electrical Code, ANSI/NFPA 70 for electrical wiring. To avoid electrical shock hazards, do not operate this device when controller enclosures are open and energized. Electrical power must be shut off and a lock-out procedure utilized to ensure all electrical power is disabled before performing maintenance to any portion of the system.
Plumbing installation must adhere to a local code and Uniform Plumbing Code (UPC), and plumbing connections and drains must adhere to local standards and facility codes.
Do not remove any Caution, Warning, or any other descriptive labels from the dispenseIT. Do not operate this device in an explosive environment or in the presence of flammable materials.
Movement or vibrations during shipment may cause connections to loosen. Check all connections before starting up a unit.
This unit’s electrical enclosure is intended for installation in ordinary locations, by the National Electrical Code, ANSI/NFPA 70, where the ambient temperature does not exceed 104°F maximum.
innovateIT Car Wash Equipment LLC does not accept liability for accidents or damages due to negligence or disregard for the instructions in this manual. Also, the Company does not accept liability for damages due to improper use of the equipment.
This instruction manual should always be kept in a safe and easily accessible place near the equipment’s site of installation and operation, and be available for the operator at the user site at any time.
If the manual is damaged, lost, or misplaced, you should immediately request a new copy from innovateIT Car Wash Equipment LLC.
1.2.1 Notifications & Symbols #
The electrical inputs and outputs (I/O) has been selected to minimize the number of sensing devices while providing the ability to diagnose failure of the equipment.
- DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
- WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
- CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
- NOTE: Used to address practices not related to physical injury.