innovateIT Car Wash Equipment Company is committed to the continuous improvement of its equipment construction quality and the safe operation of its equipment.
ATTENTION! This manual constitutes an integral part of the Reclaim System and must accompany the machine any time it is moved or relocated.
It should always be kept in a safe and easily accessibly place near the equipment’s site of installation and operation and should be available for the operator at the user site at any time.
If the manual is damaged, lost or misplaced, you should immediately request a new copy from innovateIT Car Wash Equipment LLC.
This manual covers installation, intended use and maintenance of the innovateIT Reclaim Water Treatment System. Intended use also means that all specifications in these instructions must be followed. Any use beyond the intended use is considered to be misuse and may void the warranty.
This product is covered by a 1-year limited warranty from the date of shipping. This warranty shall be void and of no effect if:
Any installation defect that was apparent or ascertainable at the time of installation was completed but was not promptly reported to innovateIT Car Wash Equipment LLC.
Damage occurs due to the customer’s failure to observe any instructions from innovateIT Car Wash Equipment or an authorized distributor and/or requirements of the manufacturer with respect to the product.
The breach results from misuse of the equipment as outlined in the instruction manual.
Safety Information #
! CAUTION !
FAILURE TO FOLLOW INSTALLATION AND OPERATING INSTRUCTIONS MAY RESULT IN DAMAGE TO EQUIPMENT OR PERSONAL INJURY.
The instructions in this manual provide the information necessary to install and operate the unit. Before starting installation, the instruction manual should be carefully read and understood.
This relates to the operation, maintenance, cleaning and troubleshooting of the equipment. This applies particularly to the Safety Instructions listed.
The basic pre-requisite for safe working is compliance with all the safety and handling instructions stated in this instruction.
Furthermore, follow all local accident, hazard prevention regulations or general safety regulations when installing and operating the Reclaim System.
It is unsafe to install, operate or service this device without first reading and understanding the Operator’s Manual in its
entirety. Keep this manual and associated documentation for future reference.
Eye protection should be worn at all times when operating the Reclaim System as unit includes high pressure water lines and 20% hydrogen peroxide which is a strong oxidizer.
! WARNING !
Read and follow all safety data sheets provided by your chemical supplier. Train all personnel on the proper handling techniques to avoid serious injury or death.
Unit installation must adhere to local codes for electrical wiring and plumbing. All maintenance and repair actions are to be performed by personnel who have been trained to support this equipment.
! WARNING !
The 24VDC signal may be present in system controller even when the controller power has been shut off. Therefore, you must turn off the 24VDC electrical signal (Reclaim Request) from the System Controller prior to performing maintenance or repair to the system controller. Failure to de-energize this circuit could lead to equipment damage or personal injury.
In addition, please verify that the signal from the belt command is a 24VDC signal to the Reclaim System.
The relay in the controller is designed for a 24VDC input and must be replaced by a 110VAC relay if the belt command supplies a 110VAC signal to the Reclaim System controller.
To avoid electrical shock hazard do not operate this device when covers or controller enclosure are opened.
! WARNING !
Electrical power must be shut off and a lock-out procedure utilized to ensure all electrical power is disabled prior to performing maintenance to any portion of the system.
Plumbing connections and drains must adhere to local standards and any facility codes.
Do not remove any Caution, Warning, or any other descriptive labels from the system.
Do not operate this device in an explosive environment or in the presence of flammable materials.
Movement or vibrations during shipment may cause connections to loosen.
Do not operate this unit in an environment where temperatures may be below 40°F or above 90° F.
Improper water flow for flushing, misuse or improper operation of this device will void manufacturer’s warranty.
It is important to completely review the entire operating manual prior to the installation and start-up of the system. The manual includes installation guidelines, start-up procedures, and operating instructions.
innovateIT Car Wash Equipment Company does not accept liability for accidents or damages due to negligence or disregard for the instructions in this manual. Also, the Company does not accept liability for damages due to improper use of the equipment.