rinseIT
The rinseIT is a high-pressure rinse arch for tunnel car washes, with adjustable oscillation and multiple top kit options. It can go anywhere in the tunnel; in our own washes, it runs after friction and wax, before sealant or ceramic applications.
Pre-plumbed manifolds, an electric drive and stainless steel construction help deliver clean, consistent results with every pass. It’s available as a complete arch or as individual manifolds that fit new or existing 3″ and 4″ arches.
- Standard, Inline or Parallel top kit, plus a side manifold on each side
- Electric drive with VFD-controlled oscillation speed
- Complete arch, or manifolds for existing 3" and 4" arches
A precise, controlled rinse,consistent results with every pass.
The rinseIT delivers a consistent high-pressure rinse from car to car, with oscillation and top kit options you can tailor to your tunnel.
Consistent Rinse Coverage
High-pressure 9-nozzle top and side manifolds deliver controlled, consistent rinsing across the vehicle.
Adjustable Oscillation
A VFD controls oscillation speed, and the spray angle adjusts on the unit, so you can dial in the rinse.
Modular Configurations
Multiple top kit styles and repositionable manifolds let you tailor performance to your tunnel layout.
Fast, Simple Installation
Pre-plumbed manifolds, plug-and-play design and stainless steel construction built for demanding tunnels.
Configure Your rinseIT
Choose a top kit to match your tunnel layout and coverage goals. Repositionable manifolds let you fine-tune performance from there.
See the rinseIT in Action
Specifications
| Specification | Value |
|---|---|
| Performance | |
| Water Usage | Dependent on nozzle selectionPer manifold |
| Pump Requirements | Dependent on nozzle selection |
| Electrical | |
| Electrical Supply | (3) 3 PH 1/2 HP motors |
| Voltage (Motor) | 208 VAC / 3 PH or 480 VAC / 3 PH |
| Max Current (Per Motor) | 2.5 A (208 V) / 1 A (480 V) |
| Connections & Dimensions | |
| Water Connections | 3/4" FNPTPer manifold |
| Arch (W × H × D) | 144" × 100.5" × 24" |
| Configuration | |
| Top Kit | Standard, Inline or Parallel |
| Manifolds | High-pressure, 9 nozzles each; repositionable |
| Side Manifolds | 1 per side, 9 nozzles eachSweep up and down |
| Oscillation | Electric drive, VFD-controlled speedSpray angle adjustable on the unit |
| Construction | Stainless steel |
| Supplied As | Complete arch or individual manifoldsManifolds fit new or existing 3" and 4" arches |
| Site Requirements | |
| Placement | Anywhere in the tunnelTypically after friction and wax, before sealant or ceramic |
| Water Supply | Fresh water recommendedSprays mostly above the window line |
| Pumps & Controls | Supplied separately |
rinseIT Product Guide
Download a printable overview of the rinseIT, including key features, specifications and top kit options.
rinseIT FAQs
What does the rinseIT do?
The rinseIT is a high-pressure rinse arch for tunnel car washes. High-pressure 9-nozzle manifolds deliver a precise, controlled rinse across the vehicle. It can go anywhere in the tunnel; in our own washes, it runs after friction and wax, before sealant or ceramic applications.
Which top kit should I choose?
The Standard top kit targets the front or rear of the vehicle, Inline targets both the front and rear, and Parallel provides a wider spray sweep on the front or rear. We’ll help you pick the kit that fits your tunnel layout and coverage goals.
Can the rinseIT’s oscillation be adjusted?
Yes. A VFD controls how fast the manifolds oscillate, and the spray angle is adjustable on the unit itself. The manifolds can also be repositioned to tailor coverage to your tunnel layout.
How much water does the rinseIT use?
Water usage depends on the nozzles you choose, so it varies by setup. We recommend fresh water, since the rinseIT sprays mostly above the window line. We’ll help you choose nozzles that match your rinse goals and tunnel layout.
What pump does the rinseIT need?
Pump requirements depend on the nozzles you choose, and pumps and controls are supplied separately. We’ll help you match a high-pressure pump station, such as the pumpIT, to the nozzles and manifolds on your rinseIT.
How is the rinseIT different from the blastIT?
Both are built on the same stainless steel arch, with an electric drive and the same top kit options. The difference is the job they do. The blastIT is a prep arch: its side manifolds sweep across the vehicle to blast off dirt before the wash, in 2 Side or 4 Side configurations of 18-nozzle manifolds, and it can run on reclaim water. The rinseIT is built to rinse: one 9-nozzle manifold on each side sweeps up and down, it usually runs later in the tunnel, after friction and wax, and it uses fresh water.
What utilities does the rinseIT need?
The rinseIT is electric. It uses three 1/2 HP, 3-phase motors on 208 or 480 VAC (2.5 A or 1 A per motor) and a 3/4″ FNPT water connection per manifold. The arch measures 144″ w × 100.5″ h × 24″ d.
What to Expect
Discuss Your Application
We’ll review your tunnel layout and rinsing needs to determine the right rinseIT configuration
Configure Your Arch
We’ll help you choose the top kit, nozzles and pump to match your coverage goals
Installation & Startup
We’ll work with your installation team or distributor to support proper installation, setup and startup of your rinseIT
Complete Your Tunnel
pumpIT
High-pressure pump stations to power the rinseIT and other high-pressure functions
blastIT
High-pressure prep arch that reduces manual prepping before the wash
wheelblastIT
Follow-along wheel cleaning that tracks each vehicle through the tunnel