Introduction #
The manufacturer innovateIT Car Wash Equipment LLC is committed to the continuous improvement of its equipment construction quality and the safe operation of its equipment.
Warranty #
This manual covers installation, intended use and maintenance of the Reverse Osmosis (RO) Spot-Free Rinse System. Intended use also means that all specifications in these instructions must be followed. Any use beyond the intended use is considered to be misuse.
This product is covered by a 1-year limited warranty from the date of shipping. This warranty shall be void and of no effect if:
Any installation defect that was apparent or ascertainable at the time of installation was completed but was not promptly reported to innovateIT Car Wash Equipment LLC.
Damage occurs due to the customer’s failure to observe any instructions from innovateIT Car Wash Equipment or an authorized distributor and/or requirements of the manufacturer with respect to the product.
The breach results from misuse of the equipment as outlined in the instruction manual.
Safety Information #
The instructions in this manual provide you with the information necessary to install and operate the Reverse Osmosis system. Before starting installation, the instruction manual should be carefully read and understood.
This relates to the operation, maintenance, cleaning and troubleshooting of the equipment.
The basic pre-requisite for safe working is compliance with all the safety and handling instructions stated in this instruction.
Furthermore, follow all local accident, hazard prevention regulations or general safety regulations when installing and operating the RO System.
Operation, maintenance, cleaning and troubleshooting of the equipment must only be carried out by trained personnel. Personnel should be able to interpret a wiring diagram, use a multimeter to read AC and DC current, and apply Lock Out Tag Out safety procedures specific to the equipment.
Eye protection should be worn at all times when operating the RO System as unit includes high pressure water lines and membrane housings which may leak if fittings loosen over time.
Unit installation must adhere to local codes for electrical wiring and plumbing.
To avoid electrical shock hazard do not operate this device when covers or controller enclosure are opened.
Electrical power must be shut off and a lock-out procedure utilized to ensure all electrical power is disabled prior to performing maintenance to any portion of the system.
Plumbing connections and drains must adhere to local standards and any facility codes.
Do not remove any Caution, Warning, or any other descriptive labels from the RO system.
Do not operate this device in an explosive environment or in the presence of flammable materials.
Movement or vibrations during shipment may cause connections to loosen. Check all connections prior to unit activation.
Do not operate this unit in an environment where temperatures may be below 40°F or above 90° F.
innovateIT Car Wash Equipment LLC does not accept liability for accidents or damages due to negligence or disregard for the instructions in this manual. Also, the Company does not accept liability for damages due to improper use of the equipment.
ATTENTION #
This manual constitutes an integral part of the Reverse Osmosis system and must accompany the machine in every movement or resale.
It should always be kept in a safe and easily accessibly place near the equipment’s site of installation and operation and should be available for the operator at the user site at any time.
If the manual is damaged, lost or misplaced, you should immediately request a new copy from innovateIT Car Wash Equipment LLC.